Pro-Care Optima

Suitable for patients in high to very high risk of pressure injuries. Auto-sensing technology with intuitive one-touch setup. Multi-zone air pressure for optimal comfort. Designed for use in the acute care sector.

• One Touch Set Up: Initiating the default program after plugging-in. Customised therapy or parameters by one touch
• Intuitive Auto-Sensing Technology:
  • Auto-recognition: Automatically initiate corresponding pressure setting to different mattress
  • Auto-adjustment: Providing an optimal pressure based on the patient’s weight distribution
• Heel Relief Function: Single air-cell deflation can float the heels with zero pressure. Activating heel protection with the one-handed control knob
• 80% of Time Saving: Bladders with quick-release detachable bases can be easily removed from the mattress during decontamination
• Extra Protection on the Sacrum:
  • Auto Seat Inflation: Initiates when the head section has been raised by ≥30 degrees to prevent bottoming out
  • Cell-in-Cell Bladder (sacrum area): Providing excellent support for patient in the sitting-up position
• Cable Management: Reducing tripping hazards for a safer healthcare environment
• 4-way Stretch Cover:
  • Antimicrobial
  • Low friction and shear
  • Vapor-permeable, water resistant
  • High-flame retardant
• Transport Mode / Built-in battery (Optional): Non-stop dynamic pressure relief for more than 6 hours during a power failure or transport (6-8 hours for a static mode without battery)
• CPR Knob: CPR deflation time <15 sec. Shorten the deflation time of the mattress to seek efficient emergency care

Size

• Pump: 13" x 6" x 10" (34.1x16.5x26cm)
• Mattress: 79" l x 35" w x 8" h (200x90x20cm)
• Cell Height: 21" x 8" (53x20cm)

Material

• Pump Case: Flame Retardent ABS
• Mattress:
  
  • Cover Material: 4-way stretch PU / Polyester cover (Optional: Nylon / PU quilted cover)
  • Cell Material: TPU

Details

• Pump:
  • Supply Voltage with Battery: AC 220 - 240V, 50 Hz, 0.6A
  • Supply Voltage without Battery: AC 220 - 240V, 50 Hz, 0.34A
  • Operating Cycle: 10, 15, 20, 25 mins
• Mattress:
  • Mattress type: 8" Replacement
  • Flame Retardency: EN 597-1 & EN 597-2
  • Cell info: 21 cells in TPU Ether
  • CPR Knob: 1 Piece
  • Alternating: 1-in-2
• Weight:
  • Pump With Battery: 11 lbs.
  • Pump Without Battery: 10 lbs.
  • Mattress: 20 lbs.
• Maximum Patient Weight: 551 lbs.